Measurement of Total Antioxidant Capacity by Electrogenerated Iodine at Disposable Screen Printed Electrodes

Total antioxidant capacity is an important parameter for the evaluation of the oxidative status in different kinds of biological samples such as plant extracts, or in food industry. We report a fast, easy, portable, cost‐effective electroanalytical method to measure total antioxidant capacity, based on the reaction of natural antioxidants with electrogenerated iodine using disposable platinum screen‐printed electrodes. This reaction can be measured by the increment of the electrochemical current signal of iodide oxidation to iodine during a voltammetric cycle. Iodine reacts with reducing compounds such as glutathione, ascorbate, gallic acid and NADH without interference of the corresponding oxidized counter‐parts. The addition of ascorbate oxidase also allows the concentration of ascorbate to be determined. The method was tested with real samples of plant extracts and the results correlated well with those obtained with a standard spectrophotometric method.     

300 MW等级燃煤机组煤粉炉与循环流化床锅炉汞排放特性比较

选取某地330 MW煤粉炉(PC炉)和350 MW循环流化床锅炉(CFB)的燃煤电厂进行汞排放特性的研究。采用30B法和安大略法对两个燃煤电厂的除尘器入口、除尘器出口、脱硫塔出口和湿式电除尘器出口的烟气进行了取样和汞浓度分析,采集了入炉煤和副产物底渣、飞灰及脱硫石膏样品。通过样品中汞含量的分布,探讨了PC炉与CFB锅炉机组现有污染物控制设备对汞的协同脱除作用。结果表明,350 MW CFB电厂除尘器出口烟气平均汞浓度降低至0.43μg/m~3,布袋除尘器对汞的捕获效率达到98.9%,相应的燃烧副产物中飞灰是汞的主要富集对象。对于330 MW PC炉电厂,除尘器入口和除尘器出口烟气汞浓度均高于350 MW CFB电厂,烟气汞浓度从除尘器入口、除尘器出口到脱硫塔出口依次降低,在脱硫塔出口烟气汞浓度降低至0.42μg/m~3,静电除尘器和湿式脱硫塔对烟气汞的捕获效率分别为75.0%和22.4%,相应的产物中飞灰和脱硫石膏中汞都有一定程度的富集。     

Synthesis and Investigation of Tetrahydro-β-carboline Derivatives as Inhibitors of Plant Pathogenic Fungi

A series of tetrahydro-ß-carbolines substituted with an alkyl or acyl side chain was synthesized and screened for its antifungal activity against plant pathogenic fungi (Bipolaris oryzae, Curvularia lunata, Fusarium semitectum, and Fusarium fujikuroi). The structure activity relationship revealed that the substituent at the piperidine nitrogen plays an important role for increasing antifungal activities. In this series, 2-octyl-2,3,4,9-tetrahydro-1H-pyrido[3,4-b]indole (3g) displayed potent antifungal activities with a minimum inhibitory concentration of 0.1 μg/mL, including good inhibitory activity to the radial growth of fungus at a concentration of 100 μg/mL compared to amphotericin B.     

Two Ecdysteroids Isolated from Micropropagated Lychnis flos-cuculi and the Biological Activity of Plant Material

Genetically uniform plant material, derived from Lychnis flos-cuculi propagated in vitro, was used for the isolation of 20-hydroxyecdysone and polypodine B and subjected to an evaluation of the antifungal and antiamoebic activity. The activity of 80% aqueous methanolic extracts, their fractions, and isolated ecdysteroids were studied against pathogenic Acanthamoeba castellani. Additionally, a Microtox^® acute toxicity assay was performed. It was found that an 80% methanolic fraction of root extract exerts the most potent amoebicidal activity at IC₅₀ of 0.06 mg/mL at the 3rd day of treatment. Both ecdysteroids show comparable activity at IC₅₀ of 0.07 mg/mL. The acute toxicity of 80% fractions at similar concentrations is significantly higher than that of 40% fractions. Crude extracts exhibited moderate antifungal activity, with a minimum inhibitory concentration (MIC) within the range of 1.25–2.5 mg/mL. To the best of our knowledge, the present report is the first to show the biological activity of L. flos-cuculi in terms of the antifungal and antiamoebic activities and acute toxicity. It is also the first isolation of the main ecdysteroids from L. flos-cuculi micropropagated, ecdysteroid-rich plant material.     

Laminarin Induces Defense Responses and Efficiently Controls Olive Leaf Spot Disease in Olive

Olive leaf spot (OLS) caused by Fusicladium oleagineum is mainly controlled using copper fungicides. However, the replacement of copper-based products with eco-friendly alternatives is a priority. The use of plant resistance-inducers (PRIs) or biological control agents (BCAs) could contribute in this direction. In this study we investigated the potential use of three PRIs (laminarin, acibenzolar-S-methyl, harpin) and a BCA (Bacillus amyloliquefaciens FZB24) for the management of OLS. The tested products provided control efficacy higher than 68%. In most cases, dual applications provided higher (p < 0.05) control efficacies compared to that achieved by single applications. The highest control efficacy of 100% was achieved by laminarin. Expression analysis of the selected genes by RT-qPCR revealed different kinetics of induction. In laminarin-treated plants, for most of the tested genes a higher induction rate (p < 0.05) was observed at 3 days post application. Pal, Lox, Cuao and Mpol were the genes with the higher inductions in laminarin-treated and artificially inoculated plants. The results of this study are expected to contribute towards a better understanding of PRIs in olive culture and the optimization of OLS control, while they provide evidence for potential contributions in the reduction of copper accumulation in the environment.     

Zinc Oxide Nanoparticles and Zinc Sulfate Impact Physiological Parameters and Boosts Lipid Peroxidation in Soil Grown Coriander Plants (Coriandrum sativum)

The objective of this study was to determine the oxidative stress and the physiological and antioxidant responses of coriander plants (Coriandrum sativum) grown for 58 days in soil with zinc oxide nanoparticles (ZnO NPs) and zinc sulfate (ZnSO₄) at concentrations of 0, 100, 200, 300, and 400 mg of Zn/kg of soil. The results revealed that all Zn compounds increased the total chlorophyll content (CHLt) by at least 45%, compared to the control group; however, with 400 mg/kg of ZnSO₄, chlorophyll accumulation decreased by 34.6%. Zn determination by induction-plasma-coupled atomic emission spectrometry (ICP–AES) showed that Zn absorption in roots and shoots occurred in plants exposed to ZnSO₄ at all concentrations, which resulted in high levels of hydrogen peroxide (H₂O₂) and malondialdehyde (MDA). Only at 400 mg/kg of ZnSO₄, a 78.6% decrease in the MDA levels was observed. According to the results, the ZnSO₄ treatments were more effective than the ZnO NPs to increase the antioxidant activity of catalase (CAT), ascorbate peroxidase (APX), and peroxidases (POD). The results corroborate that phytotoxicity was higher in plants subjected to ZnSO₄ compared to treatments with ZnO NPs, which suggests that the toxicity was due to Zn accumulation in the tissues by absorbing dissolved Zn⁺⁺ ions.     

Biogenic Synthesis of Gold Nanoparticles on a Green Support as a Reusable Catalyst for the Hydrogenation of Nitroarene and Quinoline

Direct attachment of gold nanoparticles to a green support without the use of an external reducing agent and using it for removing toxic pollutants from wastewater, i. e., reduction of nitroarene to amine, are described. A novel approach involving the reduction of gold by the jute plant (Corchorus genus) stem-based (JPS) support itself to form nanoparticles (AuNPs) to be used as a catalytic system (‘dip-catalyst’) and its catalytic activity for the hydrogenation of series of nitroarenes in aqueous media are presented. AuNPs/JPS catalyst was characterized using SEM, UV-Vis, FTIR, TEM, XPS, and ICP-OES. Confined area elemental mapping exhibits uniform and homogeneous distribution of AuNPs on the support surface. TEM shows multi-faceted AuNPs in the range of 20–30 nm. The reactivity of AuNPs/JPS for the transfer hydrogenation of nitroarene as well as hydrogenation of quinoline under molecular H₂ pressure was evaluated. Sodium borohydride, when used as the hydrogen source, demonstrates a high catalytic efficiency in the transfer hydrogenation reduction of 4-nitrophenol (4-NP). Quinoline is quantitatively and chemoselectively hydrogenated to 1,2,3,4-tetrahydroquinoline (py-THQ) using molecular hydrogen. Reusability studies show that AuNPs are stable on the support surface and their selectivity is not affected.     

Brief survey on phytochemicals to prevent COVID-19

BackgroundThe recent pandemic by COVID-19 is a global threat to human health. The disease is caused by SARS-CoV-2 and the infection rate is increased more quickly than MERS and SARS as their rapid adaptation to varied climatic conditions through rapid mutations. It becomes more severe due to the lack of proper therapeutic drugs, insufficient diagnostic tool, scarcity of appropriate drug, life supporting medical facility and mostly lack of awareness. Therefore, preventive measure is one of the important strategies to control. In this context, herbal medicinal plants received a noticeable attention to treat COVID-19 in Indian subcontinent. Here, 44 Indian traditional plants have been discussed with their novel phytochemicals that prevent the novel corona virus. The basic of SARS-CoV-2, their common way of transmission including their effect on immune and nervous system have been discussed. We have analysed their mechanism of action against COVID-19 following in-silico analysis. Their probable mechanism and therapeutic approaches behind the activity of phytochemicals to stimulate immune response as well as inhibition of viral multiplication discussed rationally. Thus, mixtures of active secondary metabolites/phytochemicals are the only choice to prevent the disease in countries where vaccination will take long time due to overcrowded population density.     

Impact of post-injection strategy on the physicochemical properties and reactivity of diesel in-cylinder soot

Post injection has significant benefit in the reduction of diesel soot emissions. Therefore, there is a need to understand the effect of post-injection strategy on soot physicochemical properties and reactivity because they play an important role in soot oxidation process that governs the final soot emissions. This work focuses on the impact of post injection on the physicochemical properties and reactivity of diesel in-cylinder soot using a main plus post injection (M*P) and a single injection (M) strategy. The soot was sampled by a developed total cylinder sampling system, and the dividing points of soot formation-dominant and oxidation-dominant phases were used for studying the impacts of post injection on the characteristics of in-cylinder soot. The physicochemical properties of the soot samples, including primary particle size, nanostructure, carbon chemical state and surface functional groups, were characterized. The soot reactivity was evaluated in terms of peak temperature, burnout temperature and apparent activation energy. In the oxidation-dominant phase, the M*P soot initially possesses smaller primary particle size, shorter fringe length, larger tortuosity, lower sp²/sp³ hybridization ratio of carbon atoms and higher content of aliphatic CH groups than the M soot. The beneficial influence of physicochemical properties on soot reactivity when using post injection is validated by the thermogravimetric data, which shows that the M*P soot is more reactive than the M soot at the onset of the oxidation-dominant phase. In the M*P case, the soot generated from the main-injection combustion has lower reactivity than the soot from the post-injection combustion after they experience the soot formation-dominant phase. The results indicate that the use of post injection leads to in-cylinder soot with physicochemical properties that favor reactivity. The enhancement of reactivity means that the soot will be more readily oxidized in the subsequent combustion process, and consequently contributes to a reduction in final soot emissions.